Baking & Oven Processes

Modern, high production bakeries are extremely severe in terms of wear, corrosion and high temperature conditions. JAX Proofer Chain Oil provides outstanding wear protection and corrosion inhibition on all proofer chains which are under some of the worst humidity and rust-prone conditions found in any industry.

The other extreme, oven conveyor chain lubrication, is handled with the highest performing oven chain lubricants in the industry. JAX Pyro-Kote Series of 100% Synthetic oven chain oils clean and maintain chain cleanliness beyond any conventional or synthetic lubricant. The high smoke and flash points enhance plant safety, and the proprietary antiwear chemistry extends chain life far beyond any normal expectations.

JAX Proofer Chain Oil can enhance plant energy conservation and proofer chain life through the use of costly corrosion inhibitors and antiwear chemistry.
JAX Pyro-Kote Series 100% synthetic oven chain oils are industry renowned for cleaning carbon deposits, their high flash points and extending chain life.
Plant safety concerns are often addressed through JAX Pyro-Guard synthetic, fire-resistant, antiwear hydraulic fluids.
Long-term, high temperature bearing life can be further extended by using our remarkable high temperature food-grade JAX Poly-Guard FG and JAX Halo-Guard FG greases for hand greased and centralized lubrication.
JAX Syngear Industrial Gear Oils 100% synthetic high temperature gear oils provide long drain, antiwear performance under severe temperature conditions.

The capstone of our programs and solutions for high production bakery lubrication is the JAX Total Plant Lube Program anchored to our comprehensive ongoing lubricant analysis program performed by JAX RPM Laboratory Division. This final step completes a total predictive maintenance program combining America's Finest Lubricants with a proactive maintenance program that assures the maximum in plant production, equipment life, efficiency and uptime.

Chain & Conveyor Lubes
Compressor Oils
Gear Box Oils
Hydraulic Oils
Greases

Chain & Conveyor Lubes

Pyro-Kote Series (ISO 32, 68, 220)
100% Synthetic JAX Pyro-Kote Series provides unsurpassed performance in the field of synthetic conveyor lubes. It is the finest, high-temperature synthetic oven chain lubricant for applications up to and exceeding 650°F. Provides extreme chain cleanliness, low volatility and excellent antiwear protection. Dispersency characteristics can clean residues from inferior high-temperature lubes. ISO Grades 32, 68, 220

Proofer Chain Oil
NSF H1
This lubricant is specially compounded for lubrication in high-humidity environments. Formulated to provide extremely high performance on bakery proofer chains and other food-processing equipment.

Magna-Kote 400 Series
Bonded ‘dry-film’ conveyor lubricants for high-temp applications. Magna-Kote 404 is graphite-based, Magna-Kote 412 is Moly Sulfide-based, and Magna-Kote 420 contains graphite, Moly and other performance additives. The carrier flashes or evaporates off at low temperatures leaving bonded ‘dry-film’ lubrication.

Compressor Oils

Syncomp-D Series
These are the finest, high-performance, synthetic Diester fluids used to lubricate all types of compressors. They offer extended drain intervals many times greater than the best mineral-based fluids. They extend compressor life and reduce routine maintenance of the compressor. They leave minimum deposits on valves of reciprocating compressors and have excellent antiwear properties. JAX Syncomp-D fluids are especially effective in sliding vane and rotating screw compressors operating under severe conditions.

Gear Box Oils

Syngear Industrial Gear Oils ISO 46, 68, 100, 150, 220, 320, 460, 680
100% Synthetic
These high-performance industrial fluids are compounded for severe-duty conditions where extreme temperatures cause problems with conventional mineral oil-based industrial gear lubes. They offer excellent gear protection and extended service life for multiple applications. Select additives provide rust protection, anti-foam, antiwear, and demulsibility.

Magna-Plate 220FG, 320FG, 460FG
NSF H1
These gear oils are partial synthetic based with sheer stable synthetic V.I. improvers. As a result, you will be able to use these in gearbox applications previously thought too severe for food-grade lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction, and minimal gear wear. Their high-film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary, and worm gears.

Hydraulic Oils

Pyro-Guard Fluids
100% Synthetic
These 100% synthetic, fire resistant, hydraulic fluids have a unique, ashless antiwear additive that offers pump and valve protection in a wide variety of applications. These hydraulic oils have very good water separation and they withstand much higher temperatures than fluids with conventional antiwear additive systems. Pyro-Guard Hydraulic Fluids are compounded 100% synthetic esters for areas requiring fire resistant, high flash point, antiwear hydraulic fluids.

Greases

Poly-Guard FG-2, FG-LT
Unsurpassed Anti-Wear
NSF H1
These are food-grade lubricants that provide performance levels higher than anything the industry has ever seen before. They have a new advanced technology thickener, greatly enhanced rust protection, and the highest level of E.P. and anti-wear performance available. Other features include excellent pumpability, separation control, and easier clean-up for sanitation. Now contains Micronox®.

Halo-Guard FG-2
Extreme High Temp - Corrosion Control
NSF H1
The latest, high performance, high temperature, food machinery grease offered by JAX. Extreme Pressure (E.P.) performance at industrial grease levels and remarkable corrosion inhibition properties make Halo-Guard FG the newest star for all grease lubricated applications in modern bakeries and food-processing plants.

Baking & Oven Processes

Copyright 2008, JAX®