|
Fiberglass Manufacturing Plants
Fiberglass manufacturing
applications are extremely severe in terms of wear, corrosion and high
temperature conditions. JAX Magna-Plate FCO Forming Chain Oil provides
outstanding wear protection and corrosion inhibition on conveyor chains under the worst
humidity and chemical applications found in any industry.
The other extreme, oven chain
lubrication, is handled with the highest performing oven chain lubricants
in the industry. JAX Pyro-Kote Series of 100% Synthetic oven
chain oils help clean and maintain chain cleanliness beyond any
conventional or synthetic lubricant. The high smoke and flash points
enhance plant safety, and the proprietary anti-wear chemistry extends
chain life far beyond any normal expectations.
- JAX Magna-Plate FCO can enhance plant energy conservation and forming chain
life through the use of costly corrosion inhibitors and anti-wear
chemistry.
- JAX Pyro-Kote Series
100% synthetic oven chain oils are industry renowned for cleaning
carbon deposits, their high flash points and extending chain life.
- Plant safety concerns are
often addressed through JAX Pyro-Guard synthetic, fire-resistant, anti-wear hydraulic fluids.
- Long-term, high
temperature bearing
life can be further extended by using our
remarkable JAX
Magna-Plate 1100 and 1200 greases for hand greased and centralized lubrication systems.
- JAX SynGear Industrial
Gear Oils 100% synthetic high temperature gear oils provide long
drain, anti-wear performance under sever temperature conditions.
The capstone of our programs
and solutions for fiberglass plant lubrication is the JAX Total Plant Lube
Program anchored to our comprehensive ongoing lubricant analysis program
performed by JAX RPM Laboratory Division.
This final step completes a total predictive maintenance program combining
America's Finest Lubricants with a proactive maintenance program that
assures the maximum in plant production, equipment life, efficiency and
uptime.
Chain
& Conveyor Lubes
Compressor
Oils
Gear Box Oils
Hydraulic Oils
Greases
Chain
& Conveyor Lubes
Pyro-Kote Series
(ISO 32, 68, 220)
100% Synthetic JAX Pyro-Kote Series provides unsurpassed performance
in the field of synthetic conveyor lubes. It is the finest, high-temperature
synthetic oven chain lubricant for applications up to and exceeding 650°F.
Provides extreme chain cleanliness, low volatility and excellent anti-wear
protection. Dispersency characteristics can clean residues from inferior
high-temperature lubes. ISO Grades 32, 68, 220
Magna-Plate FCO
(Forming Chain Oil)
This is a water and chemical -resistant high-temperature partial synthetic conveyor
lubricant for use in areas where resistance against corrosion caused by
water-soluble chemicals and processes is of primary importance. It provides excellent
dispersant performance which allows forming chains to run cleanly,
protecting chains against
abrasives or residues that adversely affect conveyor chain life.
Magna-Kote 400
Series
Bonded ‘dry-film’ conveyor lubricants for high-temp applications.
Magna-Kote 404 is graphite-based, Magna-Kote 412 is Moly Sulfide-based,
and Magna-Kote 420 contains graphite, Moly and other performance additives.
The carrier flashes or evaporates off at low temperatures leaving bonded
‘dry-film’ lubrication.
BACK
TO TOP
Compressor
Oils
Syncomp-D Series
These are the finest, high-performance, synthetic Diester fluids used
to lubricate all types of compressors. They offer extended drain intervals
many times greater than the best mineral-based fluids. They extend compressor
life and reduce routine maintenance of the compressor. They leave minimum
deposits on valves of reciprocating compressors and have excellent anti-wear
properties. JAX Syncomp-D fluids are especially effective in sliding vane
and rotating screw compressors operating under severe conditions.
BACK
TO TOP
Gear
Box Oils
SynGear-Industrial
Gear Oils ISO 46, 68, 100, 150, 220, 320, 460, 680
100% Synthetic
These high-performance industrial fluids are compounded for severe-duty
conditions where extreme temperatures cause problems with conventional
mineral oil-based industrial gear lubes. They offer excellent gear
protection and extended service life for multiple applications. Select
additives provide rust protection, anti-foam, anti-wear, and
demulsibility.
Magna-Plate Gear
Oils
Magna-Plate gear oils are fully formulated automotive/industrial gear
oils with Molybdenum additives to enhance the anti-scuff and anti-wear
properties. They were developed as energy-saving gear lubricants for use
in truck differentials. They can also be used in any industrial application
where operating conditions are severe, and temperature reduction or energy
conservation is a goal.
BACK
TO TOP
Hydraulic
Oils
Pyro-Guard Fluids
These 100% synthetic, fire resistant, hydraulic fluids have a unique, ashless anti-wear additive that
offers pump and valve protection in a wide variety of applications. These
hydraulic oils have very good water separation and they withstand much higher
temperatures than fluids with conventional anti-wear additive systems.
Pyro-Guard
Hydraulic Fluids are compounded 100% synthetic esters for areas requiring fire
resistant, high flash point, anti-wear hydraulic fluids.
BACK
TO TOP
Greases
Magna-Plate 1100
Corrosion Control
This is a specialized grease for areas of high salt or chemical
contamination, high rust and wear rates. Magna-Plate 1100 patented
corrosion control formula defies rust formation while providing excellent
anti-wear performance. High temperature thickener system provides
excellent reversibility when extended beyond its 550º
drop point.
Magna-Plate 1200
Extreme High Temp
100% Synthetic
A fully synthetic grease for temperatures up to and exceeding 600°F. This
highly thermal stable product is formulated with costly synthetic esters
and a proprietary base soap to provide excellent oxidation stability and
lubrication properties for extended periods and extremely high
temperatures.
BACK
TO TOP
Copyright 2002, JAX®
|