|
|
GEAR LUBES
| Multi Purpose Gear
Oils SAE 85W90, SAE 85W140 |
MSDS |
These are heavy-duty, fully compounded E.P. gear oils developed
for use in construction, heavy trucking, mining and agricultural machinery.
They meet the requirements of Mack GO-H and Mil-L2105D, GL-5, GL-6, and
MT-1 manual transmission specifications. JAX exclusive formula and
higher viscosity provides measurable film strength benefits for heavy duty
and off-highway equipment not found in gear oils formulated for automotive
use. JAX Multi Purpose Gear Oils have excellent thermal stability,
meet limited slip requirements, and incorporate clean gear technology.
|
| H-P Industrial Gear
Oils ISO 32, 46, 68, 100, 150, 220, 320, 460, 680 |
MSDS |
These are high-quality, Group II, mineral base gear oils that meet the specifications
of AGMA EP for industrial gear oils. They range from 2 EP through 8 EP and
can be used in bevel, helical, herringbone, spur and worm gear units.
They offer superior anti-wear, anti-foam, and excellent water separation
properties.
|
| Magna-Plate® Gear Oils
90, 140 / 90MV, 140MV |
MSDS |
|
Magna-Plate gear oils are fully formulated automotive/industrial gear
oils with Molybdenum additives to enhance the anti-scuff and anti-wear
properties. They were developed as energy-saving gear lubricants for use
in truck differentials. They can also be used in any industrial application
where operating conditions are severe, and temperature reduction or energy
conservation is a goal. |
Syngear-GL Gear Oils
SAE 75W90, SAE 80W140
100% Synthetic
|
MSDS |
These are heavy-duty, GL-5, GL-6 pure synthetic gear lubricants. They
can be used in any truck differential or transmission where GL-5, Mack
GO-H-S is specified. They have the advantage of very long drain intervals
under severe ambient conditions. They are fuel efficient under all conditions,
especially at very low temperatures. These gear oils can also be used
in a wide variety of off-highway and industrial applications where standard
mineral base fluids are not satisfactory.
Back
to Top |
Syngear-Industrial
Gear Oils 46, 68, 100, 150, 220, 320, 460, 680
100% Synthetic
|
MSDS |
These high-performance industrial fluids are compounded for severe-duty
conditions where extreme temperatures cause problems with conventional
mineral oil-based industrial fluids. They offer excellent gear protection
and extended service life for multiple applications. Additives
provide rust protection, anti-foam, anti-wear, and demulsibility.
Back
to Top
|
Synax-EP Gear Oils
ISO 150, 220, 320, 460, 680
100% Synthetic
|
MSDS |
These high-performance, extreme pressure treated industrial fluids are compounded for severe-duty
conditions where extreme temperatures and loads cause problems with conventional
mineral oil-based industrial gear lubes. They offer excellent gear protection
and extended service life for multiple applications. Select additives
provide outstanding antiwear, E.P. and rust protection, in addition to anti-foam, anti-wear, and
demulsibility.
Back
to Top
|
|
Super Cylinder Oil
|
MSDS |
This fluid is made from high-viscosity index base oils compounded with
acidless tallow and other additives. It is recommended in steam cylinders,
enclosed worm gear drives, compressor cylinders above 3000 psi, heavy
gears at low RPMs, enclosed chains and applications which call for an
AGMA #8 Compounded Oil.
Back
to Top
|
|
Worm Gear Lube
XC |
MSDS |
|
This premium lubricant is
designed and recommended for splash-lubricated, enclosed, heavy duty
worm gear sets, high-temperature bearings and for lubrication of
steam cylinders. Possesses inherent oxidation resistant properties
and is compounded with acidless tallow oil to enhance component
protection. JAX Worm Gear Lube XC’s high flash point and heat
resistance ensure cleaner valves, rings, cylinders and pistons with
minimal carbon residue.
Back
to Top
|
Magna-Plate® 220-FG,
320-FG, 460-FG, Cylinder Oil-FG
NSF H1 - Partial
Synthetic |
MSDS |
These gear oils are partial synthetic-based with sheer stable synthetic V.I. improvers.
As a result, you will be able to use these in gear box applications previously
thought to be too severe for food-grade lubricants. The superior operating
characteristics provide reduced operating temperatures, reduced friction,
and minimal gear wear. Its high-film strength offers excellent lubricity
for spur, helical, spiral, bevel, planetary, and worm gears.
Back
to Top
|
Flow-Guard
Synthetic Fluids
ISO VG 32, 46, 68, 100, 150, 220, 320, 460, 680
NSF H1 - 100% Synthetic |
MSDS |
100% Food Grade Synthetic
lubricants formulated with high performance PAO base stocks. As a result, you will be able to use these in
food processing applications requiring 100% synthetic technology, and
where ambient and operating conditions will benefit from the remarkable
capabilities of PAO based fluids. The superior operating
characteristics provide reduced operating temperatures and reduced friction,
minimizing component wear. The high-film strengths offers excellent lubricity
for spur, helical, spiral, bevel, planetary, and worm gears. These
PAO base fluids provide remarkable low temperature fluidity and
outstanding high-temperature oxidation stability.
Back
to Top
|
Perma-Gear FG Series
NSF H1 - 100% Synthetic PAG |
MSDS |
These are unique,
food-grade synthetic gear oils that have many advantages over
food-grade mineral-based gear oils. The base fluid is very stable to
heat and the pour point makes it useful at low operating
temperatures. It has a wide variety of applications in gear boxes
where mineral base oil is not practical or effective. Drain
intervals can be increased several times over mineral oils with
measurable energy saving benefits.
Back
to Top
|
|
<< JAX homepage
Copyright 2008, JAX®
|
| |
|
|
|
|